Electrochemical Stability Window Research Articles

Thiol‐Ene Photo Crosslinked PUA‐PUMA‐Based Flexible Gel Polymer Electrolyte for Lithium‐Ion Batteries

AbstractCrosslinked polymer films, formed via sol–gel and UV photocrosslinking, serve as gel polymer electrolytes (GPEs) in lithium‐ion batteries. Combining polyurethane acrylate (PUA), polyurethane methacrylate (PUMA), pentaerythritol tetrakis (3‐mercaptopropionate) (PETMP), and 3‐mercaptopropyl trimetoxysilane (MPTMS) yields flexible membranes, enhancing stability and liquid electrolyte compatibility. The resulting GPE displays higher ionic conductivity (1.46 × 10−3 S cm−1) than Celgrad2500, with PUA‐PUMA's hydrophilicity and PETMP's SH groups preventing leakage. GPPF1, the developed GPE, offers improved ionic conductivity, a stable electrochemical window up to 3.8 V, and heightened safety for versatile energy storage systems.

In Situ Polymerization Derived from PAN-Based Porous Membrane Realizing Double-Stabilized Interface and High Ionic Conductivity for Lithium-Metal Batteries.

Polymer polyacrylonitrile (PAN), with exceptional mechanical strength and ionic conductivity, is considered a potential electrolyte. However, the huge interfacial impedance of PAN-derived C≡N polar nitrile groups and Li anode limited its application. In this study, a double-stabilized interface was integrated by in situ polymerization of DOL between electrodes and a three-dimensional (3D) porous PAN polymer matrix containing SN plasticizer and LLZTO ceramic fillers to optimize the challenge of interfacial instability. The fabricated PDOL-PAN(SN/LLZTO)-PDOL composite solid electrolyte (CSE) exhibited the maximum ionic conductivities of 1.9 × 10-3 S cm-1 at room temperature and 2.5 × 10-3 S cm-1 at 60 °C, an electrochemical stability window (ESW) of 4.9 V, and a high Li+ transference number (tLi+) of 0.65. In addition, the side reactions of the PAN/Li metal were effectively prevented by inserting PDOL between the 3D porous membrane and Li electrode. Benefiting from the superior interface compatibility and ion conductivity, the Li symmetric battery showed more than 2000 h of cyclability. The solid Li/LiFePO4 full battery delivered excellent cycling performance, showing an original specific capacity of 136.2 mAh g-1 with a capacity retention of 90.1% after 350 cycles at 1C and 60 °C. Furthermore, the cycling of solid-state Li/NCM622 batteries also proved their application potential. This work presents an effective approach to solving interface problems of the PAN electrolyte for solid lithium-metal batteries (LMBs).

The NaClO4-water eutectic electrolyte for environmentally friendly electrical double-layer capacitors operating at low temperature

Herein, owing to its remarkable ionic conductivity, the 8.84 mol kg−1 NaClO4 water-in-salt (WIS) eutectic electrolyte is suggested for the low temperature operation of electrical double-layer capacitors down to -35 °C. Molecular dynamic simulations reveal that the local structure of the solution remains relatively stable from RT to -35 °C, with distinct channel-like domains formed by hydrogen-bonded water molecules, which facilitate the ionic diffusion within the bulk of the electrolyte. Interestingly, on activated carbon (AC) electrodes, the electrolyte demonstrates an electrochemical stability window (ESW) increasing from 1.8 V to 2.1 V as temperature decreases from 25 °C to -35 °C. The high ESW of this electrolyte is due to i) pH close to neutrality enabling high overpotential of water reduction on porous AC electrodes; ii) WIS characteristics with a reduced amount of free water in the Stern layer under positive polarization of AC; iii) higher oxidation potential at low temperature ascribed to the enhanced immobilization of the ClO4− anions in the Stern layer as well as reduced diffusion of water molecules in the AC electrode porosity. The electrochemical investigations on laminate AC//AC cells in the NaClO4-water electrolyte demonstrate low values of their resistive components down to -30 °C, while the devices can operate with rated voltage of 2.0 V and 1.7 V at -30 °C and RT, respectively. At -30 °C and under discharge power as high as 10 kW kg−1, the AC//AC capacitor in the NaClO4-water electrolyte outperforms the specific output energy of a traditional AC//AC cell in the 1 M TEABF4/ACN electrolyte. Hence, for sub-ambient temperatures, the presented environmentally friendly EDLC holds promise to compete with traditional devices implementing an organic electrolyte.

Constructing Enhanced Composite Solid-State Electrolytes with Sb/Nb Co-Doped LLZO and PVDF-HFP

Composite solid-state electrolytes are viewed as promising materials for solid-state lithium-ion batteries due to their combined advantages of inorganic solid-state electrolytes and solid-state polymer electrolytes. In this study, the solid electrolytes Li6.7−xLa3Zr1.7−xSb0.3NbxO12 (LLZSNO) with Sb and Nb co-doping were prepared by a high-temperature solid-phase method. Results indicate that Sb/Nb co-doping causes lattice deformation in LLZO and increases the lithium vacancy concentration and conductivity of LLZO. Then, with the co-doped LLZSNO as an inorganic filler, a composite solid electrolyte of polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP) was prepared with a casting method. The obtained composite solid electrolyte exhibits a high ionic conductivity of 1.76 × 10−4 S/cm at room temperature, a wide electrochemical stable window of 5.2 V, and a lithium-ion transfer number of 0.32. The Li|LiFePO4 coin battery with the composite solid electrolyte shows a high specific capacity of 161.2 mAh/g and a Coulombic efficiency close to 100% at 1 C. In addition, the symmetrical lithium battery Li|Li with the composite electrolyte could cycle stably for about 1500 h without failure at room temperature.

Distinguish MnO2/Mn2+ Conversion/ Zn2+ Intercalation/ H+ Conversion Chemistries at Different Potentials in Aqueous Zn||MnO2 Batteries

The rechargeable aqueous Zn||MnO2 chemistry has been extensively explored, but its electrochemical reaction mechanisms, especially in the context of MnO2/Mn2+ conversion and Zn2+/H+ intercalation chemistry, remain not fully understood. Here, we designed an amphiphilic hydrogel electrolyte, which distinguished the MnO2/Mn2+ conversion, Zn2+ intercalation, and H+ intercalation and conversion processes at three distinct discharge plateaus of an aqueous Zn||MnO2 battery. The amphiphilic hydrogel electrolyte is featured with an extended electrochemical stability window up to 3.0 V, high ionic conductivity, Zn2+‐selective ion tunnels, and hydrophobic associations with cathode materials. This specifically designed electrolyte allows the MnO2/Mn2+ conversion reaction at a discharge plateau of 1.75 V. More interesting, the discharge plateaus of ~1.33 V, previously assigned as the co‐intercalation of Zn2+ and H+ ions in the MnO2 cathode, are specified as the exclusive intercalation of Zn2+ ions, leading to an ultra‐flat voltage plateau. Furthermore, with a distinct three‐step electrochemical energy storage process, a high areal capacity of 1.8 mAh cm‐2 and high specific energy of 0.858 Wh cm‐2, even at a low MnO2 loading mass of 0.5 mg cm‐2 are achieved. To our knowledge, this is the first report to fully distinguish different mechanisms at different potentials in aqueous Zn||MnO2 batteries.

Distinguish MnO2/Mn2+ Conversion/ Zn2+ Intercalation/ H+ Conversion Chemistries at Different Potentials in Aqueous Zn||MnO2 Batteries.

The rechargeable aqueous Zn||MnO2 chemistry has been extensively explored, but its electrochemical reaction mechanisms, especially in the context of MnO2/Mn2+ conversion and Zn2+/H+ intercalation chemistry, remain not fully understood. Here, we designed an amphiphilic hydrogel electrolyte, which distinguished the MnO2/Mn2+ conversion, Zn2+ intercalation, and H+ intercalation and conversion processes at three distinct discharge plateaus of an aqueous Zn||MnO2 battery. The amphiphilic hydrogel electrolyte is featured with an extended electrochemical stability window up to 3.0 V, high ionic conductivity, Zn2+-selective ion tunnels, and hydrophobic associations with cathode materials. This specifically designed electrolyte allows the MnO2/Mn2+ conversion reaction at a discharge plateau of 1.75 V. More interesting, the discharge plateaus of ~1.33 V, previously assigned as the co-intercalation of Zn2+ and H+ ions in the MnO2 cathode, are specified as the exclusive intercalation of Zn2+ ions, leading to an ultra-flat voltage plateau. Furthermore, with a distinct three-step electrochemical energy storage process, a high areal capacity of 1.8 mAh cm-2 and high specific energy of 0.858 Wh cm-2, even at a low MnO2 loading mass of 0.5 mg cm-2 are achieved. To our knowledge, this is the first report to fully distinguish different mechanisms at different potentials in aqueous Zn||MnO2 batteries.

Flexible Supercapacitor with Wide Electrochemical Stable Window Based on Hydrogel Electrolyte.

Hydrogel electrolyte can endow supercapacitors with excellent flexibility, which has developed rapidly in recent years. However, the water-rich structures of hydrogel electrolyte are easy to freeze at subfreezing and dry at high temperatures, which will affect its energy storage characteristics. The low energy density of micro supercapacitors also hinders their development. Herein, a strategy is proposed to reduce the free water activity in the hydrogel to improve the operating voltage and the energy density of the device, which is achieved through the synergistic effect of the hydrogel skeleton, N, N'-dimethylformamide (DMF), NaClO4 and water. High concentrations of DMF and NaClO4 are introduced into sodium alginate/polyacrylamide (SA/PAAM) hydrogel through solvent exchange to obtain SA/PAAM/DMF/NaClO4 hydrogel electrolyte, which exhibited a high ionic conductivity of 82.1 mS cm-1, a high breaking strength of 563.2kPa, and a wide voltage stability window of 3.5V. The supercapacitor devices are assembled by the process of direct adhesion of the hydrogel electrolyte and laser induced graphene (LIG). The micro-supercapacitor exhibited an operating voltage of 2.0V, with a specific capacitance of 2.41 mF cm-2 and a high energy density of 1.34 µWh cm-2, and it also exhibit a high cycle stability, good flexibility, and integration performance.

Ionic liquid-based self-healing gel electrolyte for high-performance lithium metal batteries

The gel electrolytes with self-healing function are being considered as promising replacement for traditional liquid electrolytes in lithium metal batteries due to their excellent battery safety, high energy density and minimum electrolyte damage. However, balancing self-healing, conductivity and mechanical properties remains a challenge for their practical application. Herein, a new ion liquid-based self-healing gel polymer electrolyte (IL-SHGPE) is introduced. The electrolyte was synthesized via UV-induced cross-linking of a polymer containing quadruple hydrogen bond units and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIM-TFSI) ion liquid. The resultant IL-SHGPE demonstrates exceptional self-healing ability (with 95% healing efficiency within 30 min), excellent thermal stability over a wide temperature range up to 410 °C. It also exhibits impressive mechanical strength with 41.3% elongation and 1.9 MPa tensile stress, room temperature ionic conductivity of 1.29 × 10−3 S/cm, and a wide electrochemical stability window of 5.18V (vs Li/Li+). Lithium metal batteries with this electrolyte showed an initial discharge capacity of 139 mAh g−1 at 1C rate, and a capacity retention of 88.3% after 200 cycles. Therefore, this work provides a significant exploration for balancing self-healing ability, mechanical attributes, and electrochemical performance of lithium batteries, and thus contributing valuable insights towards the development of high-performance self-healing gel electrolytes for lithium metal batteries.

The Influence of Ions on the Electrochemical Stability of Aqueous Electrolytes.

The electrochemical stability window of water is known to vary with the type and concentration of dissolved salts. However, the underlying influence of ions on the thermodynamic stability of aqueous solutions has not been fully understood. Here, we investigated the electrolytic behaviors of aqueous electrolytes as a function of different ions. Our findings indicate that ions with high ionic potentials, i.e., charge density, promote the formation of their respective hydration structures, enhancing electrolytic reactions via an inductive effect, particularly for small cations. Conversely, ions with lower ionic potentials increase the proportion of free water molecules-those not engaged in hydration shells or hydrogen-bonding networks-leading to greater electrolytic stability. Furthermore, we observe that the chemical environment created by bulky ions with lower ionic potentials impedes electrolytic reactions by frustrating the solvation of protons and hydroxide ions, the products of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively. We found that the solvation of protons plays a more substantial role than that of hydroxide, which explains a greater shift for OER than for HER, a puzzle that cannot be rationalized by the notion of varying O-H bond strengths of water. These insights will help the design of aqueous systems.

The Influence of Ions on the Electrochemical Stability of Aqueous Electrolytes

AbstractThe electrochemical stability window of water is known to vary with the type and concentration of dissolved salts. However, the underlying influence of ions on the thermodynamic stability of aqueous solutions has not been fully understood. Here, we investigated the electrolytic behaviors of aqueous electrolytes as a function of different ions. Our findings indicate that ions with high ionic potentials, i.e., charge density, promote the formation of their respective hydration structures, enhancing electrolytic reactions via an inductive effect, particularly for small cations. Conversely, ions with lower ionic potentials increase the proportion of free water molecules—those not engaged in hydration shells or hydrogen‐bonding networks—leading to greater electrolytic stability. Furthermore, we observe that the chemical environment created by bulky ions with lower ionic potentials impedes electrolytic reactions by frustrating the solvation of protons and hydroxide ions, the products of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively. We found that the solvation of protons plays a more substantial role than that of hydroxide, which explains a greater shift for OER than for HER, a puzzle that cannot be rationalized by the notion of varying O−H bond strengths of water. These insights will help the design of aqueous systems.

Enhancement mechanism of the comprehensive performance of all-solid-state polymer electrolytes by halloysite nanotubes: Construction of efficient lithium-ion conduction channels

Considering the current issues with poly(ethylene oxide)-based all-solid-state polymer electrolytes (PEO-ASSPEs) employed in lithium-ion batteries (LIBs), such as low ionic conductivity, low lithium-ion transference number, narrow electrochemical stability window, and poor cyclic stability. This study introduces oxygen-vacancy-rich halloysite nanotubes (HNTs) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) into the PEO matrix to fabricate a flexible composite polymer electrolyte (CPEs) via a solvent-free method. The interaction between HNTs and LiTFSI in the PEO matrix serves to mitigate the ionic solvation effect, increase the number of free lithium-ion, and reduce the lithium-ion migration energy barrier. Additionally, the internal framework formed by the mutual stacking of HNTs reduces the number of entanglements in polymer molecular chains, enhances the mobility of the chains, and generates a continuous interface effect, forming fast lithium-ion transport channels. The CPEs prepared in this study are in conformity with the Vogel-Tammann-Fulcher (VTF) empirical equation. The CPE containing 10 wt% HNTs exhibits a high ionic conductivity (7.15 × 10−4 S cm−1) at 25 °C, a high lithium-ion transference number (0.600), a wide electrochemical stability window (5.5 V), and excellent cyclic performance (capacity retention of 82.02 % after 100 cycles at 0.1C), satisfying the electrochemical performance requirements for ASSPEs in LIBs.

Rationally coordinating polymer enabling effective Li-ion percolation network in composite electrolyte for solid-state Li-metal batteries

The sluggish lithium-ion mobility and inferior electrolyte/electrode interfacial compatibility of composite solid electrolytes greatly hinder the practical application of solid-state lithium-metal batteries. Here, a novel composite polymer electrolyte (CPE) with effective Li+ percolation network is synthesized based on single-ion conductive polymer lithiated polyvinyl formal (LiPVFM) and garnet Li6.4La3Zr2Ga0.2O12 (LLZGO) nanoparticles. The supramolecular interaction between the branched hydroxyl in LiPVFM and the lattice oxygen in LLZGO fillers endows CPE with a continuous percolation structure and improved toughness. Meanwhile, the rational O-Li+ coordination in the LiPVFM random polymer significantly enhances Li+ transfer within the percolation network. Therefore, this as-prepared CPE presents a lithium-ion transference number of 0.75 and an ionic conductivity of 0.527 mS cm−1 at 30 °C, alongside an electrochemical stability window of 4.6 V and a substantial suppression of Li dendrite growth. In addition, ultra-stable interfaces between this CPE and high-voltage LiNi0.6Mn0.2Co0.2O2 (NMC) cathode during cycling can be determined by in-situ electrochemical impedance spectroscopy and in-situ differential electrochemical mass spectrometry characterization. This work is a new exploration for the structural design of CPEs and highlights the importance of “rational coordination” of alkali cation in solid batteries.

High-rate aqueous magnesium ion battery enabled by Li/Mg hybrid superconcentrated electrolyte

Rechargeable aqueous magnesium ion batteries (AMIBs) are considered a promising energy storage system due to the relatively high energy density, excellent rate performance and reversibility, and absence of dendrite formation during cycling. However, the high surface charge density of Mg2+ ions results in slow diffusion kinetics, and high voltage leads to excessive electrolyte decomposition at the electrode/aqueous electrolyte interface, thereby limiting the development of high-energy–density MIBs. In this work, we extend the electrochemical stability window of the aqueous electrolyte to 2.1 V by using a hybrid ion superconcentrated electrolyte at concentrations not achievable with Mg2+ electrolytes alone. The AMIB with a water-in-salt (WIS) electrolyte delivers discharge capacities of up to 200.6 and 84.4 mAh g−1, and energy densities of 170.1 and 68.1 Wh Kg−1 at 0.5 and 20 A g−1, respectively, representing excellent rate performance, while retaining 85 % of the specific capacity after 2000 cycles. Additionally, we explore the corresponding electrochemical reaction mechanism, revealing the synergistic effect of Mg2+ and Li+ ions in the charge/discharge process, which supports the excellent electrochemical performance of AMIB.

Rapid ion conduction enabled by synergism of oriented liquid crystals and Electron-Deficient boron atoms in multiblock copolymer electrolyte for advanced Solid-State Lithium-Ion battery

Liquid crystals (LCs) with characteristics of self-orientation have exhibited superiorities in construction of ordered ion channels for rapid Li-ion transport. Herein, reversible addition-fragmentation chain transfer (RAFT) polymerization is employed to synthesize a unique type of boron-containing LCs based ABCBA type multiblock copolymers for the first time. The composite block copolymer electrolytes (BCPEs) are fabricated by introducing the copolymer electrolytes into glass fiber separator via solution-casting method. Noteworthily, LCs can not only provide ordered ion channels for efficient ion conduction, but also ameliorate the mechanical strength. Meanwhile, the nitrile groups with high polarity from LCs are able to further facilitate lithium salt dissociation and reinforce electrochemical stability of the system. Crucially, boron elements with electron deficiency can anchor anions and adsorb impurities to endow BCPEs with boosted ion transport capability and sufficient electrochemical stability. Consequently, the well-designed electrolyte shows high ionic conductivity of 1.13 × 10−4 S cm−1 (30 °C), and broadened electrochemical stability window of 4.85 V. Impressively, the assembled Li/LiFePO4 cells and even Li/LiMnxFe1-xPO4 high-voltage cells exhibit remarkable performances. This work provides a synthetic strategy of structure-controlled polymer electrolyte matrix and illustrates that the BCPEs are definitely a category of satisfactory electrolyte candidate for high-performance solid-state lithium-ion batteries.

Low-cost and high-safety montmorillonite-based solid electrolyte for lithium metal batteries

Composite solid-state electrolyte have good interfacial compatibility and mechanical properties, but their safety (such as easy to catch fire) and economic cost are still problems. In present work, an composite solid-state electrolyte was prepared by inserting poly(vinylidene fluoride)-based polymer electrolyte matrix into the interlayer of a low cost clay mineral-montmorillonite. The composite electrolyte exhibited remarkable characteristics, including excellent flame retardancy, high room temperature ionic conductivity of 2.28 × 10−4 S cm−1, wide electrochemical stability window of 4.8 V, high lithium-ion transference number of 0.57 and good mechanical strength of 12.58 MPa. Furthermore, LiFePO4-based solid-state battery, utilizing this composite solid-state electrolyte, exhibited stable cycling with discharge specific capacity of 130 mAh g−1 for over 100 cycles at a rate of 0.5C at room temperature. This successful performance demonstrated the potential of utilizing low-cost and environmentally friendly raw clay mineral materials in high energy density solid-state battery applications.

Lithiated Nafion membrane as a single-ion conducting polymer electrolyte in lithium batteries

AbstractSingle lithium-ion conducting polymer electrolytes are promising candidates for next generation safer lithium batteries. In this work, Li+-conducting Nafion membranes have been synthesized by using a novel single-step procedure. The Li-Nafion membranes were characterized by means of small-wide angle X-ray scattering, infrared spectroscopy and thermal analysis, for validating the proposed lithiation method. The obtained membranes were swollen in different organic aprotic solvent mixtures and characterized in terms of ionic conductivity, electrochemical stability window, lithium stripping-deposition ability and their interface properties versus lithium metal. The membrane swollen in ethylene carbonate:propylene carbonate (EC:PC, 1:1 w/w) displays good temperature-activated ionic conductivities (σ ≈ 5.5 × 10–4 S cm−1 at 60 °C) and a more stable Li-electrolyte interface with respect to the other samples. This Li-Nafion membrane was tested in a lithium-metal cell adopting LiFePO4 as cathode material. A specific capacity of 140 mAhg−1, after 50 cycles, was achieved at 30 °C, demonstrating the feasibility of the proposed Li-Nafion membrane.

Insight into the Improvement Strategies of Aqueous Electrolyte for Aqueous Rechargeable Batteries

AbstractAqueous rechargeable batteries (ARBs) have attracted wide attention due to their rich resources, environmental friendliness, and safety. The high ionic conductivity, safety and interfacial wettability of the aqueous electrolyte are essential for energy storage devices. However, the narrow electrochemical stability window (ESW) of the aqueous electrolyte and the side reactions of the electrode/electrolyte lead to the low energy density of the ARBs. In the past studies, the above problems were generally solved by improving the ion transport characteristics of the electrolyte and the electrode/electrolyte interface. Herein, we discuss the background, limitations, and key concepts for performance improvement of aqueous electrolytes, aiming to provide a comprehensive perspective and inspiration for further research on aqueous electrolytes and promote their development and application in the field of energy storage.

Hot-Pressing Enhances Mechanical Strength of PEO Solid Polymer Electrolyte for All-Solid-State Sodium Metal Batteries.

Poly(ethylene oxide) (PEO)-based solid polymer electrolytes (SPEs) are widely utilized in all-solid-state sodium metal batteries (ASSSMBs) due to their excellent flexibility and safety. However, poor ionic conductivity and mechanical strength limit its development. In this work, an emerging solvent-free hot-pressing method is used to prepare mechanically robust PEO-based SPE, while sodium superionic conductors Na3 Zr2 Si2 PO12 (NZSP) and NaClO4 are introduced to improve ionic conductivity. The as-prepared electrolyte exhibits a high ionic conductivity of 4.42×10-4 S cm-1 and a suitable electrochemical stability window (4.5V vs Na/Na+ ). Furthermore, the SPE enables intimate contact with the electrode. The Na||Na3 V2 (PO4 )3 @C ASSSMB delivers a high-capacity retention of 97.1% after 100 cycles at 0.5 C and 60°C, and exhibits excellent Coulombic efficiency (CE) (close to 100%). The ASSSMB with the 20µm thick electrolyte also demonstrates excellent cyclic stability. This study provides a promising strategy for designing stable polymer-ceramic composite electrolyte membranes through hot-pressing to realize high-energy-density sodium metal batteries.

Solid-state synthesis and ion transport characteristics of the β-KSbF4 for all-solid-state fluoride-ion batteries

All-solid-state fluoride ion batteries (FIBs) have been recently considered as a post-lithium-ion battery system due to their high safety and high energy density. Just like all solid-state lithium batteries, the key to the development of FIBs lies in room-temperature electrolytes with high ionic conductivity. β-KSbF4 is a kind of promising solid-state electrolyte for FIBs owing to its rational ionic conductivity and relatively wide electrochemical stability window at room temperature. However, the previous synthesis routes of β-KSbF4 required the use of highly toxic hydrofluoric acid and the ionic conductivity of as-prepared product needs to be further improved. Herein, the β-KSbF4 sample with an ionic conductivity of 1.04 × 10−4 S cm−1 (30 °C) is synthesized through the simple solid-state route. In order to account for the high ionic conductivity of the as-synthesized β-KSbF4, X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) are used to characterize the physicochemical properties. The results show that the as-synthesized β-KSbF4 exhibits higher carrier concentration of 1.0 × 10−6 S cm−1 Hz−1 K and hopping frequency of 1.31 × 106 Hz at 30 °C due to the formation of the fluorine vacancies. Meanwhile, the hopping frequency shows the same trend as the changes of ionic conductivity with the changes of temperature, while the carrier concentration is found to be almost constant. The two different trends indicate the hopping frequency is mainly responsible for the ionic conduction behavior within β-KSbF4. Furthermore, the all-solid-state FIBs, in which Ag and Pb + PbF2 are adopted as cathode and anode, and β-KSbF4 as fluoride ion conductor, are capable of reversible charge and discharge. The assembled FIBs show a discharge capacity of 108.4 mA h g−1 at 1st cycle and 74.2 mA h g−1 at 50th cycle. Based on an examination of the capacity decay mechanism, it has been found that deterioration of the electrolyte/electrode interface is an important reason for hindering the commercial application of FIBs. Hence, the in-depth comprehension of the ion transport characteristics in β-KSbF4 and the interpretation of the capacity fading mechanism will be conducive to promoting development of high-performance FIBs.

Hydrated eutectic electrolyte as catholyte enables high-performance redox flow batteries

Compared with conventional electrolytes, eutectic electrolytes are recognized as an ideal electrolyte for the next-generation electrochemical energy storage system characterized by facile synthesis and composition tunability. However, the eutectic electrolytes still suffer from sluggish kinetics, which inhibit their widespread application in redox flow batteries. Here, a well-designed hydrated eutectic electrolyte system (HEE) composed of iron chloride hexahydrate, urea and water with stoichiometric ratio at 2:1:6 is developed as catholyte to improve the cycling performance of hybrid redox flow batteries. The HEEs with precisely controlled water content could inhibit the water-induced side reactions, while expand the electrochemical stability windows. Moreover, the water molecules gradually replace the anions to participate in the solvation sheath of Fe3+ ions, forming a solvation structure of [FeClx(H2O)y]3−x, which result in an improved ion dissociation degree, ionic conductivity and redox kinetics. As a result, hybrid iron-based redox flow battery based on the optimal HEE exhibits a highly reversibly redox reaction of Fe3+/Fe2+ and reduced overpotentials. Furthermore, the battery could stably cycle over 120 cycles with a capacity retention of 87.75 % at a relatively high current density of 10 mA cm−2, delivering a maximum power density of ∼50 mW cm−2, which is much higher than reported eutectic-based flow batteries. This research offers new insights into rationally designing of advanced eutectic electrolytes for high-efficient redox flow batteries.